广州最大网站建设/郑州关键词排名顾问

因项目需求需要部署主从MySQL集群，继续采用上次的部署的MySQL镜像arm64v8/mysql:latest，版本信息为v8.1.0。计划部署服务器192.168.31.100和192.168.31.101

部署MySQL主节点

在192.168.31.100上先创建好/data/docker/mysql/data和/data/docker/mysql/logs目录，创建好/data/docker/mysql/my.cnf文件，内容如下：

[mysqld]
server-id=100
log-bin=mysql-bin
port=3306
max_connections=200
max_connect_errors=10
character-set-server=utf8
default-storage-engine=INNODB
default_authentication_plugin=mysql_native_password
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES 
performance_schema_max_table_instances=600[mysql]
default-character-set=utf8[client]
port=3306
default-character-set=utf8

然后创建MySQL镜像，执行

docker run --network=host -d -p 3306:3306 \
--name mysql --privileged=true \
-e MYSQL_ROOT_PASSWORD="888888" -e MYSQL_USER="admin" -e MYSQL_PASSWORD="888888" \
-v=/data/docker/mysql/my.cnf:/etc/my.cnf \
-v=/data/docker/mysql/data:/var/lib/mysql \
-v=/data/docker/mysql/logs:/var/log \
-v=/etc/localtime:/etc/localtime \
arm64v8/mysql:latest --server-id=100

执行成功后，检查MySQL是否启动成功，执行docker ps，出现如下内容表示启动成功

[root@server01 mysql]# docker ps
CONTAINER ID        IMAGE                             COMMAND                  CREATED             STATUS                   PORTS                    NAMES
50214a2de4f8        arm64v8/mysql:latest              "docker-entrypoint.s…"   17 minutes ago      Up 17 minutes                                     mysql

进入镜像：docker exec -it mysql /bin/bash
登录MySQL：mysql -uroot -p
依次执行如下命令：

ALTER USER 'root'@'%' IDENTIFIED WITH 'mysql_native_password' BY '888888';
CREATE USER 'slave'@'%' IDENTIFIED BY '888888';
GRANT REPLICATION SLAVE, REPLICATION CLIENT ON *.* TO 'slave'@'%';
ALTER USER 'slave'@'%' IDENTIFIED WITH 'mysql_native_password' BY '888888';
FLUSH PRIVILEGES;

然后执行show master status命令：

mysql> show master status;
+---------------+----------+--------------+------------------+-------------------+
| File          | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+---------------+----------+--------------+------------------+-------------------+
| binlog.000002 |     2925 |              |                  |                   |
+---------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)

注意这里的File和Position，很重要，后面会用到。

部署MySQL从节点

在192.168.31.101上先创建好/data/docker/mysql/data和/data/docker/mysql/logs目录，创建好/data/docker/mysql/my.cnf文件，内容如下：

[mysqld]
server-id=101
log-bin=mysql-bin
port=3306
max_connections=200
max_connect_errors=10
character-set-server=utf8
default-storage-engine=INNODB
default_authentication_plugin=mysql_native_password
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES 
performance_schema_max_table_instances=600[mysql]
default-character-set=utf8[client]
port=3306
default-character-set=utf8

然后创建MySQL镜像，执行

docker run --network=host -d -p 3306:3306 \
--name mysql --privileged=true \
-e MYSQL_ROOT_PASSWORD="888888" -e MYSQL_USER="admin" -e MYSQL_PASSWORD="888888" \
-v=/data/docker/mysql/my.cnf:/etc/my.cnf \
-v=/data/docker/mysql/data:/var/lib/mysql \
-v=/data/docker/mysql/logs:/var/log \
-v=/etc/localtime:/etc/localtime \
arm64v8/mysql:latest --server-id=101

执行成功后，检查MySQL是否启动成功，执行docker ps，出现如下内容表示启动成功

[root@server02 mysql]# docker ps
CONTAINER ID        IMAGE                  COMMAND                  CREATED             STATUS              PORTS                    NAMES
f6793b5e6ded        arm64v8/mysql:latest   "docker-entrypoint.s…"   21 minutes ago      Up 21 minutes                                mysql

进入镜像：docker exec -it mysql /bin/bash
登录MySQL：mysql -uroot -p
依次执行如下命令：

ALTER USER 'root'@'%' IDENTIFIED WITH 'mysql_native_password' BY '888888';
FLUSH PRIVILEGES;

配置从节点

change master to master_host='192.168.31.100', master_user='slave', master_password='888888', master_port=3306, master_log_file='binlog.000002', master_log_pos=2925, master_connect_retry=30;

注意这里的master_log_file和master_log_pos需要和前面主节点匹配起来，具体参数说明如下：

# master_host ：Master库的地址
# master_port：Master的端口号，指的是容器的端口号
# master_user：用于数据同步的用户
# master_password：用于同步的用户的密码
# master_log_file：指定 Slave 从哪个日志文件开始复制数据，即上文中提到的 File 字段的值
# master_log_pos：从哪个 Position 开始读，即上文中提到的 Position 字段的值
# master_connect_retry：如果连接失败，重试的时间间隔，单位是秒，默认是60秒

然后开通同步执行：start slave;
如果需要关闭同步执行：stop slave;
然后执行show slave status命令：

+----------------------------------+-------------+-------------+-------------+---------------+-----------------+---------------------+------------------------+---------------+-----------------------+------------------+-------------------+-----------------+---------------------+--------------------+------------------------+-------------------------+-----------------------------+------------+------------+--------------+---------------------+-----------------+-----------------+----------------+---------------+--------------------+--------------------+--------------------+-----------------+-------------------+----------------+-----------------------+-------------------------------+---------------+---------------+----------------+----------------+-----------------------------+------------------+--------------------------------------+-------------------------+-----------+---------------------+----------------------------------------------------------+--------------------+-------------+-------------------------+--------------------------+----------------+--------------------+--------------------+-------------------+---------------+----------------------+--------------+--------------------+------------------------+-----------------------+-------------------+
| Slave_IO_State                   | Master_Host | Master_User | Master_Port | Connect_Retry | Master_Log_File | Read_Master_Log_Pos | Relay_Log_File         | Relay_Log_Pos | Relay_Master_Log_File | Slave_IO_Running | Slave_SQL_Running | Replicate_Do_DB | Replicate_Ignore_DB | Replicate_Do_Table | Replicate_Ignore_Table | Replicate_Wild_Do_Table | Replicate_Wild_Ignore_Table | Last_Errno | Last_Error | Skip_Counter | Exec_Master_Log_Pos | Relay_Log_Space | Until_Condition | Until_Log_File | Until_Log_Pos | Master_SSL_Allowed | Master_SSL_CA_File | Master_SSL_CA_Path | Master_SSL_Cert | Master_SSL_Cipher | Master_SSL_Key | Seconds_Behind_Master | Master_SSL_Verify_Server_Cert | Last_IO_Errno | Last_IO_Error | Last_SQL_Errno | Last_SQL_Error | Replicate_Ignore_Server_Ids | Master_Server_Id | Master_UUID                          | Master_Info_File        | SQL_Delay | SQL_Remaining_Delay | Slave_SQL_Running_State                                  | Master_Retry_Count | Master_Bind | Last_IO_Error_Timestamp | Last_SQL_Error_Timestamp | Master_SSL_Crl | Master_SSL_Crlpath | Retrieved_Gtid_Set | Executed_Gtid_Set | Auto_Position | Replicate_Rewrite_DB | Channel_Name | Master_TLS_Version | Master_public_key_path | Get_master_public_key | Network_Namespace |
+----------------------------------+-------------+-------------+-------------+---------------+-----------------+---------------------+------------------------+---------------+-----------------------+------------------+-------------------+-----------------+---------------------+--------------------+------------------------+-------------------------+-----------------------------+------------+------------+--------------+---------------------+-----------------+-----------------+----------------+---------------+--------------------+--------------------+--------------------+-----------------+-------------------+----------------+-----------------------+-------------------------------+---------------+---------------+----------------+----------------+-----------------------------+------------------+--------------------------------------+-------------------------+-----------+---------------------+----------------------------------------------------------+--------------------+-------------+-------------------------+--------------------------+----------------+--------------------+--------------------+-------------------+---------------+----------------------+--------------+--------------------+------------------------+-----------------------+-------------------+
| Waiting for source to send event | 10.16.39.9  | slave       |        3306 |            30 | binlog.000002   |                2925 | ecs02-relay-bin.000002 |          1804 | binlog.000002         | Yes              | Yes               |                 |                     |                    |                        |                         |                             |          0 |            |            0 |                2925 |            2014 | None            |                |             0 | No                 |                    |                    |                 |                   |                |                     0 | No                            |             0 |               |              0 |                |                             |              100 | 7ec2b8d1-ae21-11ef-9e2a-fa163e637a5c | mysql.slave_master_info |         0 |                NULL | Replica has read all relay log; waiting for more updates |                 10 |             |                         |                          |                |                    |                    |                   |             0 |                      |              |                    |                        |                     0 |                   |
+----------------------------------+-------------+-------------+-------------+---------------+-----------------+---------------------+------------------------+---------------+-----------------------+------------------+-------------------+-----------------+---------------------+--------------------+------------------------+-------------------------+-----------------------------+------------+------------+--------------+---------------------+-----------------+-----------------+----------------+---------------+--------------------+--------------------+--------------------+-----------------+-------------------+----------------+-----------------------+-------------------------------+---------------+---------------+----------------+----------------+-----------------------------+------------------+--------------------------------------+-------------------------+-----------+---------------------+----------------------------------------------------------+--------------------+-------------+-------------------------+--------------------------+----------------+--------------------+--------------------+-------------------+---------------+----------------------+--------------+--------------------+------------------------+-----------------------+-------------------+

关键看Slave_SQL_Running_State列，没有报错即可。
至此MySQL主从配置已经全部部署好。

验证测试

在主节点上创建一个数据库test，并创建一个表，插入几条数据

从节点上截图如下：